GNSS Sensors Enclosures

Multi-channel, multi-frequency rugged GNSS receivers allowing OEMs and System Integrators to rapidly integrate centimeter level positioning and precise heading into their application by using a dual antenna connection or by using an INS sensor.

The Trimble Rugged GNSS receivers support GPS L1/L2/L5, GLONASS L1/L2/L3, BeiDou B1, B2,B3 signals, Galileo and LBand signals in a rugged receiver that provides fast RTK initialization with proven low-elevation tracking and Sub-Decimeter positioning with OmniSTAR XP/HP/RTX.

Easy to use software commands simplify integration and reduce development times. All software features are password-upgradeable, allowing functionality to be upgraded as your requirements change.

Trimble/Applanix line of GNSS OEM Sensors Enclosures include the Trimble BX992, Trimble BX940, Trimble BX982, Trimble BX935-INS, Trimble ABX-Two, Applanix POS AVX 210 and Trimble AX940i.

Applanix POS AV is a hardware and software system specifically designed for Direct Georeferencing of airborne sensor data. Supported by Applanix’ industry expertise and technological innovation, POS AV is engineered for aerial cameras, scanning lasers, imaging sensors, synthetic aperture radar, and LIDAR technology.

Datasheet for Trimble GNSS OEM Comparison

 

Quotation Request

applanix-logo-2

AX940i

The new Trimble AX940i is a triple-frequency smart antenna with integrated inertial navigation system. Taking advantage of Trimble’s expertise in both GNSS and Inertial technology the AX940i has been designed for applications requiring continuous centimeter accuracy in a compact package. By integrating inertial sensors on the same module, robust high-accuracy positions are produced in all environments. The receiver is also ideal for use as a GNSS DGPS/RTK base station.

Key Featurs:

  • Trimble Maxwell™ 7 Technology
  • Trimble ProPoint™ positioning engine
  • Onboard high accuracy inertial sensor
  • package integrated with GNSS for precise position and orientation
  • 336 Channels for multi-constellation
  • GNSS support
  • Trimble RTX and OmniSTAR Support
  • Rugged IP67 Smart Antenna
  • Compact design for mobile applications
  • Flexible RS232, USB, CAN and Ethernet interfacing
  • Centimeter-level position accuracy
  • Advanced RF Spectrum Monitoring
  • Integrated WiFi, Bluetooth

AX940

The Trimble AX940 supports both triplefrequency for the GPS and GLONASS constellations plus dual-frequency from BeiDouand Galileo. As the number of satellites in the constellations grows the AX940 is ready to take advantage of the additional signals.

Key Features:

  • Trimble Maxwell™ 7 Technology
  • Trimble ProPoint™ positioning engine
  • 336 Channels for multi-constellation GNSS support
  • Trimble RTX and OmniSTAR Support
  • Rugged IP67 Smart Antenna
  • Compact design for mobile applications
  • Flexible RS232, USB and Ethernet interfacing
  • Centimeter-level position accuracy
  • Advanced RF Spectrum Monitoring

BX992

The BX992 enclosure is a dual-antenna receiver with integrated inertial navigation system powered by the BD992-INS. The unit structure is an environmentally sealed enclosure built to withstand harsh environments.

Key Features:

  • Trimble Maxwell 7 Technology
  • Onboard high accuracy inertial sensor package integrated with GNSS for precise position and orientation
  • 336 Channels for multi-constellation GNSS support
  • OmniSTAR/RTX Support
  • Compact design for mobile applications
  • Flexible RS232, USB and Ethernet interfacing
  • Centimeter level position accuracy

Advanced RF Spectrum Monitoring

BX940

The BX940 enclosure is an integrated GNSS-Inertial engine delivering high accuracy GNSS, DGNSS positions in the most challenging environments powered by the BD940-INS. The unit is a robust navigation solution that has an environmentally sealed enclosure.

Key Features:

  • Trimble Maxwell 7 Technology
  • Onboard high accuracy inertial sensor package integrated with GNSS for precise position and orientation
  • 336 Channels for multi-constellation GNSS support
  • OmniSTAR/RTX Support
  • EMI shielded module
  • Compact design for mobile applications
  • Flexible RS232, USB and Ethernet interfacing
  • Centimeter level position accuracy
  • Advanced RF Spectrum Monitoring

Trimble BX982

The Trimble® BX982 GNSS receiver enclosure is a multi-channel, multi-frequency OEM GNSS receiver which allows OEM’s and System Integrators to rapidly integrate centimeter level positioning and precise heading into their application. The BX982 supports GPS L1/L2/L5, GLONASS L1/L2/L3, BeiDou B1, B2 and Galileo signals.

  • Easy to integrate rugged package
  • Two 220 channel Maxwell 6 chips for multi-constellation GNSS support
  • OmniSTAR VBS / XP / G2 / HP / RTX support
  • Dual antenna inputs for precise heading calculation
  • Centimeter level position accuracy
  • Convenience of Ethernet connectivity
  • Supports FDE and RAIM

Applanix POS AVX 210

GNSS-Inertial solution designed to reduce the cost and improve the efficiency of mapping with small and medium format cameras. The single rugged enclosure contains a precision GNSS receiver and inertial sensor components, logging capability, interface for mapping sensors and TrackAir Flight Management System. The POS AVX 210 is fully supported by POSPacMMS, powerful GNSS/Inertial processing software featuring the advanced Applanix SmartBaseTM and Applanix In-FusionTM technology for increased productivity.

 

  • High-performance Direct Georeferencing solution for improved efficiency and high accuracy of mapping with small and medium format digital cameras and low altitude LiDAR sensors
  • Reduce/eliminate GCP’s
  • Reduce Sidelap
  • Compact and rugged enclosure with survey-grade multi-frequency GNSS receiver and MEMS inertial components
  • Applanix IN-FusionTM GNSS-Inertial and SmartCalTM compensation technology for superior position and orientation performance
  • Compatible with TrackAir Flight Management System (NanoTrack)
  • Supported by POSPac MMS industry leading software for Direct Georeferencing of airborne mapping sensors
  • RTK position combined with high-accuracy orientation

Trimble® ABX-Two

The Trimble® ABX-Two is the successor to the Trimble ABX Series OEM sensors. The Trimble ABX-Two provides faster Dual Frequency based Heading acquisition and an improved positioning engine with additional GNSS signals. In addition, the ABX-Two can support two modules that can be used for Precise Platform Position (P3) using data from three antennas for full GNSS attitude.

Key Features:

  • Dual Core Engine with Z-Blade Technology
  • HIGH PERFORMANCE RTK receiver
  • 5 Dual-Band GNSS
  • Precise 3D ATTITUDE
  • Precise Point Positioning using Trimble® RTX
  • Compact, Lightweight Enclosure