Handheld and Fixed Analyzers and monitors

Installation, maintenance, and troubleshooting of microwave cables and communication systems can be challenging, especially when you are out on the field.

Comm-Connect Analyzers and monitors offer you a very cost-effective way to test RF systems with fixed monitors or with battery operated, handheld units ideal for use in field.

 

Quotation Request

SITEONE CABLE AND ANTENNA ANALYZER

A truly handheld analyzer covering all major communication bands from 50 kHz to 4400 MHz.

Has a large number of measurement screens available, in order to accommodate all the different parameters in an antenna installation.

Measurement screens can show 2 simultaneous graphs, from 2 different parameters in order to bring further clarity to your measurements and with internal memory you can store years of measurement data.

For documentation reference the instrument has a built-in real time clock.

In order to ensure uninterrupted daily work, the instrument is equipped with LiIon cells capable of more than 4 hours of continuous work.

Accessory kit with soft carrying bag, Peli case, car charger and coax adapters for standard types are available.

 

Features:

  • Fast and cost-effective Handheld
  • Light weight with Rugged design
  • Graphical swept analysis
  • Store sweeps on memory stick
  • Measurement modes:
    • SWR & S11
    • Distance-To-Fault
    • Smith Chart
    • S21, S11 & S21
    • S11 & Smith Chart
    • R, j, Z

 

SWR TRUE ANTENNA ANALYZER

A versatile analyzer covering all major communication bands from 30MHz to 2700MHz. Analyzes antennas and cables. Measurements are represented graphically as VSWR or Return Loss plots. Small, handy and light weight battery operated with more than 6 hours of continuous operation on the internal NiMh cells.

The built in PLL synthesized generator offers a superior accuracy with small step size and the I/Os and serial com allowing USB stick and PC connection and controls.

Accessory kit with soft carrying bag, car charger and coax adapters for standard types.

 

Features:

  • Antenna and Cable VSWR
  • Manual or Auto Scale
  • Back light for dim areas
  • Auto Power off
  • RTC time stamp
  • Hold and store traces on USB
  • Handle file by time and date
  • Operate while charging
  • Accessory kits – soft carrying bag, car charger and coax adapters

RF ONE POWER METER

A very versatile instrument covering both analog and digital carriers in an extremely wide frequency range from 30MHz to 6GHz. Capable of measuring forward and reflected power in the range of a few milliwatts up to 500 Watts. I/Os allowing serial communication to PC, USB to memory stick and USB Serial communication. The I/O options are used to write plots and can also be used to operate the instrument, giving commands and receiving data. For documentation reference the instrument has a real time clock.

The RF One instrument is small, handy and light weight battery operated with more than 3 hours of continuous operation on the internal NiMh cells and also available with accessory kit with soft carrying bag, car charger and coax adapters for standard types.

Features:

  • Antenna and Cable VSWR
  • Antenna and Cable Return Loss
  • Forward / Reflected power
  • Manual or Auto Scale
  • Back light for dim areas
  • Simple menu system
  • Remote control (USB)
  • Operate while charging

PMR POWER METER

A modern version of the traditional Antenna Watt and VSWR instrument. The instrument covers bands from 30MHz to 500MHz. The unit will measure forward and reflected power in the range from milliwatts up to 100Watts. Built in frequency counter that will show the transmit frequency and will call the calibration table for the actual frequency.

Outside the range of the counter the instrument can be set into manual mode giving a wider dynamic range. RF Power Meter will calculate VSWR or Return Loss, and features Peak and Hold mode.

Accessory kit with soft or hard carrying bag, car charger and coax adapters for standard types are available.

Features:

  • Frequency range: 30MHz – 500MHz
  • VSWR: < 1.05:1
  • 50Ohms “N” Female connector
  • Power Range: 1.5mW to 100W
  • Antenna and Cable VSWR
  • Antenna and Cable Return Loss
  • Measure forward \ reflected power
  • Back light for dim areas
  • Operate while charging
  • Operation time: > 5 hours

SAFEONE RF SAFETY MONITOR

RF Safety Monitor covering the requirements set forth in WHO ICNIRP specifications. Has a very wide frequency range covering 30MHz to 10GHz, which makes it suitable for use in almost all antenna installations. Due to the innovative lightweight design, technicians can wear this at all times, without the need to constantly be observant of the state of the instrument. Powered with standard batteries, with 250 days of continuous operation.

Features:

  • Professional & Public exposure limit
  • Audible Alarm
  • Silent mode
  • Compliant to WHO/ICNIRP
  • Battery operated
  • LED Alarm
  • Shaped frequency response:
    • WHO / ICNIRP
    • US FCC 96-326
    • Canada Safety Code 6
    • EU directive 2013/35/EU

4-CHANNEL USB BROADCAST MONITOR

Entry Level Broadcast Power Monitor that controls two external RF Measuring heads. The high dynamic range with external couplers and RF measuring heads cover from 1W to 1MW. Equipped with the RMS Probes the Power conversion algorithms handles multi carrier, multi-mode signals. With the Diode base probe, the power readout gives good repeatable results. The power readout is auto scaled and VSWR will be calculated between the two probes and makes it ideal for monitor and control the last part of your RF network installation from transmitters to the antenna.

Features:

  • Forward \ Reflected Power
  • True RMS
  • True Power Level
  • VSWR
  • Configurable alarms
  • Digital output
  • Optocoupler output
  • Fits 19″ Panels, up to 3 per row
  • Stand-alone mounting on frames

MINI WEB RF POWER MONITOR (2 CH)

Mini Web RF Power Monitor has 2 RF inputs for easy monitoring of Forward and Reverse RF Power in a typical coupler installation. The power readout is auto scaled and VSWR can be calculated between the two RF inputs. Mechanical mounting is made easy by mounting flaps protruding the casing.

Features:

  • Forward \ Reflected Power
  • True RMS Power
  • VSWR
  • Configurable alarms
  • 5 TTL Alarm outputs
  • 1 Opto Alarm output
  • Local display
  • Web server
  • SNMP Enabled with traps
  • Wall or Coupler mount

WEB RF POWER MONITOR (8 CH)

This RF Power Monitor can control up to 8 external RF Power Probes. The high dynamic range with external couplers and RF Power Probes covers from 1W to 1MW. The Power conversion algorithms handles multi carrier, multi-mode, peak, average and RMS signals. The instrument has SNMP support to allow network management. The instrument can be configured for VSWR and Power limits to give alarms. The alarms can be configured to operate relay drivers and/or isolated Optocouplers. The alarms can also be configured as SNMP traps sending relevant information to the network control center or sending an e-mail. All values are logged and time stamped to a USB stick every minute.

Features:

  • Forward \ Reflected Power
  • True RMS Power
  • VSWR
  • Configurable alarms
  • Opto output
  • Local display
  • Web server
  • SNMP Enabled with traps
  • 19″ Rack Mount

WEB RF POWER MONITOR (8 CH + 4 OUTPUTS)

This RF Power Monitor can control up to 8 external RF Power Probes. The high dynamic range with external couplers and RF Power Probes covers from 1W to 1MW. The Power conversion algorithms handles multi carrier, multi-mode, peak, average and RMS signals. The instrument has SNMP support to allow network management. The instrument can be configured for VSWR and Power limits to give alarms. The alarms can be configured to operate relay drivers and/or isolated Optocouplers. The alarms can also be configured as SNMP traps sending relevant information to the network control center or sending an e-mail. All values are logged and time stamped to a USB stick every minute.

Features:

  • Forward \ Reflected Power
  • True RMS Power
  • VSWR
  • Temperature
  • Configurable alarms
  • 8 TTL Alarm LEDs
  • 4 Opto outputs LEDs
  • Local display
  • Web server
  • SNMP Enabled with traps
  • 19″ 1U Rack mount

TRUE RMS PROBES

A power probes capable of measuring power even in a multiple carrier installation. Regardless of physical waveform, the probes will measure the True RMS power of the signal. When used together with the Broadcast Power Monitor type 3024, you can add Web and SNMP capabilities to your mast site installation.

Features:

  • Wideband 0.1-2500MHz
  • UHF Band IV and V
  • VHF Band I, II and III
  • UMTS
  • Multiple carriers
  • Any waveform
  • RMS Mode
  • Average Mode
  • Peak Sync Mode
  • True RMS Power
  • Frequency compensated

DIODE POWER PROBE

The Diode based temperature compensated probe is designed for use with the COMM-connect range of Power Monitors. The probe will handle from 50µW to 100mW. Used with external couplers and our measurement system application from 1W to 1MW, a high dynamic range can be configured.

This Diode based probe gives excellent stable results along with the COMM-connect Power Monitor variants and provide you with a number of applications to monitor and control the last part of your RF network from transmitters to the antenna.

Features:

  • Wideband
  • Multiple carriers
  • Any waveform
  • Temperature compensated

PROBE CABLES

True RMS Probe cables and Diode Probe cables are available. Both can be used with Power Monitor products and their respective probes. Cables are screened for optimum signal transport. Two types are available, one for connecting one probe per probe port, and the second for connecting two probes per probe port. Standard lengths are 2 meters per probe and custom length are also available.

Features:

  • Shielded (True RMS)
  • Coax (Diode)
  • DB9 for Monitor end
  • LEMO/TNC for Probe end