Inertial Measurement Sensors are used in a wide variety of applications. Those include Inertial Measurement Units (IMU) and Navigation Systems (NAV).

We offer a broad range of high quality and reliable IMU and Navigation systems of our leading global partners.

Geodetics is an expert in Navigation systems and advanced sensing systems. Geodetics precise Positioning, Navigation and Timing (PNT) solutions are designed to address a wide range of requirements for Air, Sea and Land, including high speed pointing/attitude and relative position/angle applications.

Aceinna is a spin-off of Memsic Inc. a world leader in MEMS sensors technology. Aceinna’s inertial systems provide end-users and systems integrators with fully-qualified MEMS-based solutions for measurement of static and dynamic motion in a wide variety of challenging environments, including; avionics, remotely operated vehicles, agricultural and construction vehicles and automotive test.



Quotation Request



The ACEINNA OpenIMU300ZA is an easy-to-use high-performance 9 DOF open inertial platform. The OpenIMU300 features a precision 3-Axis Accelerometer, low-drift 3-Axis Rate Gyro, and 3-Axis Magnetometer. The low-power platform is powered by a 168MHz ARM M4 CPU with a Floating Point Unit. The OpenIMU300 runs the OpenIMU open-source stack that includes an optimized full-state Kalman Filter for Attitude and GPS-Aided Position-Velocity-Time (PVT) measurement. A free tool-chain based on VS Code supports PC, MAC, Ubuntu.

Key Features:

  • Open Source Tool Chain
  • Custom Algorithms
  • 168MHz ARM M4 CPU
  • Built in 16-State Open Source Extended State Kalman Filter
  • Low-Drift 3 axis MEMS angular rate sensor
  • High Performance 3 axis MEMS Accelerometer
  • 3 axis magnetic sensor
  • SPI and UART interfaces
  • Up to 3 UARTs
  • Wide Temp Range, -40C to +85C
  • High Reliability
  • MTBF > 50k hours
  • Open Community & Support




The INS1000 is a state-of-the-art, high performance GNSS with built-in inertial sensors. It offers dual frequency RTK and tight coupling between GNSS and inertial sensors to provide cm-level accuracy, enhanced reliability, and superior performance during GNSS outages. The Automotive Dead Reckoning (ADR) solution delivers strong performance in GNSS challenged urban environments.


Key Features:

  • Tightly coupled GNSS + Inertial solution
  • Internal MEMS Gyros and Accelerometers
  • GPS, GLONASS, Beidou, Galileo, SBAS
  • Dual antennae for accurate heading
  • Dual frequency (L1 / L2) RTK
  • 100 Hz navigation solution (position, velocity, pitch, roll, heading)
  • Calibrated over -40C to +85C
  • High Reliability, MTBF > 50k hours


The ACEINNA IMU381ZA is an improved, pin-compatible version of the popular IMU380ZA. It’s a miniature fully calibrated 6 DOF inertial measurement system designed for demanding embedded applications that require a complete dynamic measurement solution in a robust low-profile package. IMU381ZA provides a standard SPI bus for cost-effective board-to-board communications.

The IMU381ZA-200 has a +/-200dps gyro FSR, and +/-4g accelerometer FSR. The IMU381ZA-400 has a +/-400dps gyro FSR, and +/-8g accelerometer FSR.

Key Features:

  • H/W and S/W compatible with IMU380ZA
  • Complete 6 DOF Inertial System
  • SPI (or UART) Interface
  • Update Rate, 1Hz to 200Hz
  • 1kHz Clock Synch Input
  • Miniature Package, 37 x 24 x 9.5 mm
  • Lightweight < 17 g
  • Low Power Consumption < 250 mW
  • Wide Temp Range, -40C to +85C
  • High Reliability, MTBF > 50k hours