GNSS Boards

The latest centimeter-level positioning technology for system integrators. GPS/GNSS receivers are designed to allow easy incorporation into specialized or custom hardware solutions.

GPS/GNSS OEM receiver modules harness the widest range of GPS L1/L2/L5 and GLONASS L1/L2 signals in easy-to-integrate modules that provide fast Real-Time Kinematic (RTK) initialization with proven low-elevation tracking. Decimeter positioning with OmniSTAR XP/HP support is also available.

Trimble’s GNSS receivers are designed for easy integration and rugged dependability. Just like other Trimble embedded technologies, easy to use software commands simplify integration and reduce development times. All software features are password-upgradeable, allowing functionality to be upgraded as your requirements change.

Trimble’s quality GPS/GNSS OEM receiver modules currently include the UAS1,  BD992, BD992-INS,  BD910, BD920, BD930, BD940, BD970, BD982, BD990, BD935-INS, the MB-One and the MB-Two.

Datasheet for Trimble GNSS OEM Comparison

 

Quotation Request

UAS1

The Trimble® UAS1 supports dual-frequency from GPS, GLONASS, and Galileo constellations. The UAS1 GNSS receiver module has been designed for UAV / UAS applications requiring centimeter accuracy in a very small package.

The Trimble UAS1 was designed for easy integration and rugged dependability.

The Trimble UAS1 design is compact, with an MB-Two footprint and has a rugged, high-vibe latched connector manufactured that is tested to Trimble’s highest quality standards.

 

Key Features:

  • Compact design for UAV/UAS applications
  • Power input range 7 – 60VDC
  • Rugged latched connector for I/O
  • Industry standard camera hotshoe circuit
  • CAN bus integrated
  • LED indicators for status checks
  • Trimble RTX and OmniSTAR Support
  • EMI shielded GNSS module
  • Centimeter-level position accuracy
  • Advanced RF spectrum monitoring
  • Data logging enabled
  • Flexible interfacing over RS232 and USB

BD992-INS

The BD992-INS is a dual-antenna receiver with an integrated inertial navigation system. It is a robust navigation system that supports position and orientation at high update rates.

Key Features:

  • Trimble Maxwell 7 Technology
  • Onboard high accuracy inertial sensor package integrated with GNSS for precise position and orientation
  • 336 Channels for multi-constellation GNSS support
  • OmniSTAR/RTX Support
  • Compact design for mobile applications
  • Flexible RS232, USB and Ethernet interfacing
  • Centimeter level position accuracy
  • Advanced RF Spectrum Monitoring

BD992

The BD992 is a dual-antenna receiver that delivers centimeter accurate positions and precise heading. Heading derived from dual-antenna GNSS measurements helps overcome issues such as difficulty determining where the antenna is positioned relative to the vehicle and object of interest.

Key Features:

  • Trimble Maxwell 7 Technology
  • Dual-antenna inputs for precise heading calculation
  • 336 Channels for multi-constellation GNSS support
  • OmniSTAR/RTX Support
  • Compact design for mobile applications
  • Flexible RS232, USB and Ethernet interfacing
  • Centimeter level position accuracy
  • Advanced RF Spectrum Monitoring
mb-two

MB-Two

Versatile, powerful, compact and smart. The Trimble MB-Two provides faster Dual Frequency based Heading acquisition and an improved positioning engine with additional GNSS signals. In addition, two MB-Two modules may be used for Precise Platform Position (P3) using data from three antennas for full GNSS attitude.

Key Features:

    • Precise Heading + Pitch/Roll
    • Improved Dual Frequency Heading
    • Dual Core Engine with Z-Blade Technology
    • Precise Platform Positioning (P3)
    • Web User-Interface
    • Supports Trimble® CenterPoint® RTX for up to 4 cm accuracy
    • Superior Connectivity
    • Ethernet, USB 2.0, Serial Ports (LVTTL)
    • Small Form Factor
    • Low Power

BD940-INS

The BD940-INS integrates the latest in precision inertial sensors on the same module where robust high accuracy positions are produced in all environments. As the number of satellites in the constellations grows, the BD940-INS is ready to take advantage of the additional signals.

Key Features:

  • Trimble Maxwell 7 Technology
  • Onboard high accuracy inertial sensor package integrated with GNSS for precise position and orientation
  • 336 Channels for multi-constellation GNSS support
  • OmniSTAR/RTX Support
  • EMI shielded module
  • Compact design for mobile applications
  • Flexible RS232, USB and Ethernet interfacing
  • Centimeter level position accuracy
  • Advanced RF Spectrum Monitoring

BD940

The BD940 is a triple frequency receiver that delivers the quickest and most reliable RTK and RTX initializations for centimeter positioning. The BD940 reduces radiated emissions which speeds compliance certification and time to market. It provides assurance of long-term future-proofing and trouble-free operation.

Key Features:

  • Trimble Maxwell 7 Technology
  • 336 Channels for multi-constellation GNSS support
  • OmniSTAR/RTX Support
  • EMI shielded module
  • Compact design for mobile applications
  • Flexible RS232, USB and Ethernet interfacing
  • Centimeter level position accuracy
  • Advanced RF Spectrum Monitoring

BD990

The BD990 is a triple frequency receiver for all GNSS constellations. The BD990, along with the rest of the BD product family, redefines high-performance positioning and comes with easy to use software which simplifies integration and reduces development time.

Key Features:

  • Trimble Maxwell 7 Technology
  • 336 Channels for multi-constellation GNSS support
  • OmniSTAR/RTX Support
  • Compact design for mobile applications
  • Flexible RS232, USB and Ethernet interfacing
  • Centimeter level position accuracy
  • Advanced RF Spectrum Monitoring

BD970

The Trimble BD970 GNSS system is a compact multi-constellation receiver designed to deliver centimeter accuracy to a variety of applications. The Trimble BD970 GNSS supports a wide range of satellite signals, including GPS L2C and L5, GLONASS L1/L2 and BeiDou, B1 and B2 signals as well as Galileo. The Trimble BD970 was designed for easy integration and rugged depend ability.

  • 220 Channels for Multi-Constellation GNSS Support
  • Flexible RS232, USB, Ethernet or CAN Interfacing
  • Centimeter level position accuracy
  • Compact Form Factor

BD982

The Trimble BD982 GNSS system is a single board solution for precise position and heading. The product delivers the latest in GNSS signal support delivering multi-constellation RTK baselines between the two connected antennas and to a remote base station. The BD982 comes with dual chips that support two antennas connected to the board. Independent observations from both antennas are passed to the processor where multi-constellation RTK baselines are computed.

  • Dual-antenna inputs for precise heading calculation
  • Multi-Constellation GNSS Support
  • OmniSTAR VBS/XP/G2/HP support
  • Flexible RS232, USB, Ethernet or CAN Interfacing
  • Centimeter level position accuracy