Vertical Gyros (VG)

Home > Inertial & MEMS Sensors > Vertical Gyros (VG)

Memsic Vertical Gyros are Six-degree-of-freedom (6DOF) strapdown inertial systems with Kalman filter & attitude algorithm for accurate roll/pitch measurements in dynamic environments.

Memsic Inc. a world leader in MEMS sensor technology.

Memsic’s inertial systems provide end-users and systems integrators with fully-qualified MEMS-based solutions for measurement of static and dynamic motion in a wide variety of challenging environments, including avionics, remotely operated vehicles, agricultural & construction vehicles and automotive test.

The current vertical gyros series includes the VG440 and Open IMU300ZA.

 

Quotation Request

OPEN-IMU300ZA

ACEINNA OPEN IMU300ZA – INERTIAL MEASUREMENT SYSTEM

The ACEINNA OpenIMU300ZA is an easy-to-use high-performance 9 DOF open inertial platform. The OpenIMU300 features a precision 3-Axis Accelerometer, low-drift 3-Axis Rate Gyro, and 3-Axis Magnetometer. The low-power platform is powered by a 168MHz ARM M4 CPU with a Floating Point Unit. The OpenIMU300 runs the OpenIMU open-source stack that includes an optimized full-state Kalman Filter for Attitude and GPS-Aided Position-Velocity-Time (PVT) measurement. A free tool-chain based on VS Code supports PC, MAC, Ubuntu.

Key Features:

  • Open Source Tool Chain
  • Custom Algorithms
  • 168MHz ARM M4 CPU
  • Built in 16-State Open Source Extended State Kalman Filter
  • Low-Drift 3 axis MEMS angular rate sensor
  • High Performance 3 axis MEMS Accelerometer
  • 3 axis magnetic sensor
  • SPI and UART interfaces
  • Up to 3 UARTs
  • Wide Temp Range, -40C to +85C
  • High Reliability
  • MTBF > 50k hours
  • Open Community & Support

 

Datasheet
vg440

Memsic VG440 – MEMS-BASED VERTICAL GYRO

The Memsic VG440 is a high-reliability low power strapdown vertical gyroscope that provides roll, pitch and yaw measurement data in both static and dynamic environments. The VG440 can accept external GPS aiding inputs for optimized performance, and is available in standard and high range sensor configurations.

 

Key Features:

  • Roll, Pitch, Yaw and 6DOF Inertial Outputs
  • Accuracy < 0.2 deg
  • Output Data Rate > 100 Hz
  • High-Range Sensor Options (400 deg/sec and 10g)  
  • GPS Aiding Input
  • Low Power < 3W
  • High Reliability, MTBF > 25,000 hours
  • Analog Output Option  
Datasheet

Related Products

Digital Attitude Sensor

GNSS Boards

GNSS-Inertial OEM Positioning & Orientation Systems