All of our components can be modified or fully customized to meet your requirements.
Broad selection of high standard and specialized performance amplifiers.
From an economical solution to space grade, with off the shelf general purpose, Wideband LNA or Power amplifier to customization options up to110GHz. Our amplifiers are built using the best components available and assembled with the highest quality.
Standard Features:
RF filters are a key component in practically any signal chain. Depending on the application, it is an essential component in order to filter out noise and unwanted signals, limit a transmit signal in order to prevent interfering with other signals or isolate channels in a transceiver.
Up to 110GHz filter components and band pass filters, low pass filters and high pass filters used in broadband RF & Microwave and communication systems.
Spacek Labs offers both custom and standard designed active and passive multipliers in a frequency range of 10 to 110 GHz. MIL-Spec or Space-Qualified units are also available.
The active multiplier line includes 2 thru 8 times multiplication factors operating all the way through W-band. The passive multiplier line utilizes variable-resistance Schottky barrier diodes as the non-linear element to create multiplication factors of 2 thru 4 times. All passive multipliers are of balanced configuration to suppress undesired harmonics, unconditionally stable for any input/output VSWR and they cover complete waveguide bandwidths.
Multipliers are available in:
Standard Features:
Spacek Labs offers three categories of frequency sources from 18GHz up to 110GHz.
Gunn Oscillators– These are relatively inexpensive stable sources, that can be fixed, mechanical or varactor tuned.
Frequency Synthesizers – A lower frequency synthesizer is multiplied, amplified and filtered to produce a clean and stable band of frequencies in the millimeter-wave frequency range.
Phase-Locked Sources – Single Frequency Phase Locked Oscillators in Ku band are multiplied, amplified and filtered to produce a clean and stable output in the millimeter-wave frequency range.
Lineup of Receivers in standard and custom designs are available. Spans up to 110GHz and offers high performance, waveguide or coaxial ports, with mounting details or freestanding, IP66 weatherized system and more.
Custom-made receivers are also available to meet your electrical, mechanical or pricing requirements.
Standard Features:
Transceivers are available from 18-110 GHz. System bandwidths range from under 1 GHz to full waveguide bandwidths, with either coax or waveguide ports. These transceivers are designed to offer premium performance at a fair price, offer separate two-channel, full-duplex designs and use a common phase-locked local oscillator driving two mixers. The upconverting mixer has a bandpass filter followed by an optional power amplifier on the output. The downconverting mixer can have an optional low-noise amplifier in front of it. Output powers of up to 1 watt and noise figures as low as 4.0 dB are available. Cross channel isolation is greater than 60 dB. Also available are multiple channel versions – i.e. one upconverter channel and two to four downconverter channels. Any LO frequency can be chosen to optimize the IF band.
Standard Features:
Transmitter are available in frequencies from 18 to 110 GHz and offered in bandwidths from less than 1 GHz to full waveguide bandwidths. An integral RF High or Low Pass filter is used to reject the unwanted sideband.
Custom designs are also available.
Standard Features:
Spacek Labs Radiometer Front-ends are available in frequencies from 18 to 110 GHz. Radiometers are offered in bandwidths spanning a frequency range from less than 1 GHz to 10 GHz. A lineup of standard and custom-tailored Radiometer designs is available to meet all your electrical, mechanical or pricing requirements.
Standard Features:
